Karata Intimidator® Belt Drives
Main Belt Drive PageSoftail Belt DrivesSoftail Belt DrivesXCD Belt DrivesDyna Belt Drives FXR Belt DrivesRoad King Belt DrivesShovelhead Belt DrivesPanhead Belt DrivesKnucklehead Belt DrivesKick Start Belt Drives

INTIMIDATOR PRIMARY BELT DRIVES - PAN, SHOVEL, EVO KICK START

1955 - up Left-Side Drive: 3”, 4”, 5” Widths - CONVERT ANY 4-SPEED MODEL TO A SOFTAIL 5-SPEED
1955 - up Left-Side Drive: 3”, 4" Widths - 4-SPEED OR AFTERMARKET 5-IN-4 TRANSMISSIONS
 PANHEAD 4.0 inch primary belt drive 1990 - 1999
 
INTIMIDATOR 1970-up 4-speed FX/FL models Conversion to 1990-1999 Softail transmission
3"16491
4" [shown]16492
5"16493
   PANHEAD 4.0 inch primary belt drive Swing arm frame Conversion to 1990-1999 Softail
INTIMIDATOR 1970-up 4-speed FX/FL models Ratchet Top 4-speed transmission
3" [shown]16489
4" 16490
 

NOT PICTURED

 
INTIMIDATOR 1955-1969 4-speed Panhead -Rigid frame Conversion to 1990-1999 Softail transmission
3" 16496
4" 16497
5" 16498
 
INTIMIDATOR 1955-1969 4-speed Panhead with 1973-1978 Ratchet Top 4-speed transmission
3"16494
4" 16495

Designed for motorcycles with kick-start ONLY. These primary belt drives will work on Big Twin and Custom models from 1955-up with kick-start, and offer 3 transmission options

CONVERT ANY 1970-1984 & 1955-1969 FX/FL 4-SPEED MODEL TO A SOFTAIL 5-SPEED
Available in three sizes, massive 5”, beefy 4” and traditional 3”, this innovative primary belt drive converts any 1955 - 1969 FX/FL 4-speed with a rigid frame to accept a 1990-1999 Softail style 5-speed transmission. This combination installs in the 4-speed swingarm frame with only a slight modification to the transmission case. Rigid frame applications require no modifications, but a Paughco transmission plate is necessary.

1970-1984 & 1955-1969 FX/FL 4-SPEED MODELS WITH 4-SPEED OR AFTERMARKET 5-IN-4 TRANSMISSIONS Any 1970-1984 FX/FL 4-speed swingarm model can be fitted with a primary belt drive. These belt drives are available for motorcycles running either 1973 - 1978 Ratchet Top 4-speeds or 5-in-4 transmission conversions and are available in two sizes, beefy 4” and traditional 3”.

CUSTOM OPTIONS FOR CUSTOM BIKES
primary belt drives #16489 - 16498 are designed for custom motorcycles that use aftermarket 4-speed-style frames or Rigid frames that use ratchet-top 4-speed transmissions. For 1990-1999 Softail transmission conversions, many aftermarket Softail and rigid frames can be used. Regardless of which transmission option you choose, the primary belt drives offer new options for custom motorcycle design.

outboard bearing support system is included with all 5” belt drives and is an ideal option for 3” and 4” drives. See Outboard Bearing Supports [OBSS] for the wide assortment of Outboard Bearing Support plates and cover combinations available.

ALL INTIMIDATOR SERIES PRIMARY BELT DRIVES INCLUDE THE FOLLOWING:
  • One-piece billet aluminum motor plate with sealed mainshaft bearing, installed
  • Billet aluminum jackshaft support
  • Billet steel starter jackshaft
  • Front pulley with steel retaining ring
  • Rear pulley with ring gear and double-row clutch hub bearing, installed
  • Goodyear Hibrex with Flexten Plus technology 8mm belt
  • Engine shaft nut
  • All necessary hardware included

 

Karata Enterprises Co
3 River Road
Conshohocken, PA 19428
Phone 610-825-2070
Fax 610-941-6142
[email protected]