INTIMIDATOR PRIMARY BELT DRIVES - SHOVELHEAD
1970-1984 Left-Side Drive - 3”, 4”, 5” Widths SOFTAIL 5-SPEED CONVERSION CONVERT ANY FX/FL 4-SPEED
1970-1984 Left-Side Drive - 3”, 4” Widths: FX/FL 4-SPEED & 5-IN-4 TRANSMISSIONS
|
|
| INTIMIDATOR 5.0" primary belt drive 1970-1984 4-speed FX/FL swingarm models Conversion to 1990-1999 Softail transmission shown with 16120 outboard bearing support system 16432 optional offsets: .250", .500", .750", 1.000", 1.250", 1.4375". 1.500" & 2.000". | LSD | 16432 |
| |
INTIMIDATOR 4.0" primary belt drive 1970-1984 4-speed FX/FL
swingarm models - Conversion to
1990-1999 Softail transmission shown with optional 40088 ‘Smoothie’ front pulley cover & 40090 ‘Smoothie’ rear pulley cover 16431 optional offsets: .250", .500", .750", 1.000", 1.250", 1.4375". 1.500" & 2.000". | LSD | 16431 |
|
|
|
INTIMIDATOR 3.0" primary belt drive 1970-1984 4-speed FX/FL
swingarm models - Conversion to 1990-1999 Softail transmission shown with optional 40097 ‘Hubcap’ front pulley cover & 40095 ‘Hubcap’ rear pulley cover 16430 optional offsets: .250", .500", .750", 1.000" , 1.250", 1.4375". 1.500" & 2.000". | LSD | 16430 |
| |
| INTIMIDATOR 4.0" primary belt drive 1970-1984 4-speed FX/FL modelswith 1973-1978 Ratchet Top 4-speed transmission or 5-in-4 transmission conversions 16465, 16467 optional offsets: .250", .500", .750", 1.000" & 1.250". | 4 speed | 16465 | 5 in 4 | 16467 |
|
|
|
INTIMIDATOR 3.0" primary belt drive 1970-1984 4-speed FX/FL models
with 1973-1978 Ratchet Top 4-speed transmission or 5-in-4 transmission conversions 16464, 16466 optional offsets: .250", .500", .750", 1.000" & 1.250".
| 4 speed | 16464 | 5 in 4 | 16466 |
| |
Every KARATA INTIMIDATOR SERIES Primary belt drive kit is complete as shown above. 5" kits include an outboard bearing support |
| |
|
SOFTAIL 5-SPEED CONVERSION CONVERT ANY FX/FL 4-SPEED
KARATA'S INTIMIDATOR SERIES belt drives for Shovelhead
(and early Evolution FX) models offer a wide selection for upgrading classic 4-speed FX/FL models. Available in three sizes, massive 5”, beefy 4” and traditional 3”. This innovative INTIMIDATOR SERIES primary belt drive converts any 1970 - 1984 FX/FL 4-speed swingarm model to accept a 1990-1999 Softail-style 5-speed transmission. This combination installs in the 4-speed swingarm frame with only a slight modification to the transmission case and provides a perfect upgrade to the traditional 4-speed swingarm
frame.
These KARATA INTIMIDATOR SERIES left-side drive primary belt drive kits [16430, 16431, 16432] can be ordered with offset motor plates: .250", .500", .750", 1.000", 1.250", 1.4375". 1.500" & 2.000".
FX/FL 4-SPEED & 5-IN-4 TRANSMISSIONS
Any 1970-1984 FX/FL 4-speed swingarm model
can be fitted with a KARATA INTIMIDATOR SERIES primary belt drive. These belt drives are available for motorcycles running either 1973 - 1978 Ratchet Top 4-speeds or 5-in-4 transmission conversions and are available in two sizes, beefy 4” and traditional 3”.
These KARATA INTIMIDATOR SERIES left-side drive primary belt drive kits [16464, 16465, 16466, & 16467] can be ordered with offset motor plates: .250", .500", .750", 1.000" & 1.250".
KARATA outboard bearing support system is included with all 5” INTIMIDATOR SERIES belt drives and is an ideal option for 3” and 4” drives.
ALL INTIMIDATOR SERIES PRIMARY
BELT DRIVES INCLUDE THE FOLLOWING:- One-piece billet aluminum motor plate with
sealed mainshaft bearing, installed
- Billet aluminum jackshaft support
- Billet steel starter jackshaft
- Front pulley with steel retaining ring
- Rear pulley with ring gear and double-row
clutch hub bearing, installed
- Goodyear Hibrex with Flexten Plus technology 8mm belt
- Engine shaft nut
- All necessary hardware included
- 5-inch belt drives include your choice of outboard bearing support kits. See OBSS for all bearing support plate styles.
| |
|