KARATA'S BILLET OUTBOARD BEARING SUPPORT SYSTEMS
KARATA'S outboard bearing support systems are sold as part of all 5" INTIMIDATOR SERIES primary belt drives. They are also offered as optional accessories for the 3" and 4" INTIMIDATOR belt drives and can be retrofitted to all INTIMIDATOR belt drives ever made. Over 30 different support plates ave available in both Softail-style and FXR/FLT - style platforms, in addition to several belt cover options. Specialized Outboard Bearing supports for Karata's NEW BIG DOG and XCD [eXtended Center Distance] are specified below .
The main link in KARATA'S outboard bearing support systems are the massive bearings. Measuring 3-inches in diameter, these bearings can take the load, the torque and the abuse of the highest- horsepower bikes. Housed in heavy CNC-sculpted billet aluminum carriers the big bearings provide the rock-solid support for KARATA'S INTIMIDATOR SERIES primary belt drives.
Simple installation and ease of servicing were two of the key features designed into the KARATA'S Outboard Bearing Support System. Installation is literally as simple as removing the front pulley�s guide plate and replacing it with the bearing carrier. Once both bearing carriers are installed, the center support plate slips in place completing the installation. For future servicing, the outboard bearing support system can be removed in whole or part in a manner of minutes. As with all KARATA'S belt drives, every component of the outboard bearing support system is available individually for servicing and rebuild.
| | 
KARATA's Front and Rear Bearing Support Carriers
|
| | 
All KARATA's Precision Machined Plates have a recess to accept bearing support carriers
|
|
With a KARATA'S outboard bearing support system, the pulleys are locked in place with no movement possible. Because all motorcycle models use specific center distances between the engine�s sprocket shaft and the transmission�s mainshaft, every INTIMIDATOR SERIES motor plate is machined to
these specific dimensions. By adding outer bearing carriers to each pulley that are tied together with a support plate that has the exact same center distance as the motor
plate, the pulleys are now locked in place and can NEVER MOVE.
Other manufacturers of outer bearing supports actually bolt their support plate to the motor plate,
assuming that this adds further strength. In truth, this is not the case. Once the pulleys are secured with the outer support plate, they can never move. It is crucial to ensure that the center distance on the support plate matches the motor plate, and KARATA'S state-of-the-art CNC machining centers
are accuate to within .0002�. No other belt drive manufacturer can match the precision, quality and design innovation of KARATA'S and no other outboard bearing support works better and simpler. OUTBOARD BEARING SUPPORT SYSTEM
Complete Outboard Bearing Support Kits and one-piece Billet plates
| | 
| | 
|
| | 
| | 
|
| | 
| | 
|
| | 
partial top cover
| | 
partial top cover
|
| | 
partial top cover
| | 
partial top cover
|
| | 
full top cover
| | 
full top cover
|
| | 
full top cover
| | 
full top cover
|
| | 
| | 
|
| | 
| | 
full top cover |
| | 
full top cover
| |  full top cover
|
| | 
| | 
|
| | 
| | 
|
| | 
| | 
|
| |
| | 
|
| | 
| | 
|
| | 
Partial Top Cover
Partial covers enclose the top of the front pulley and cover about one-third of the belt. Fabricated from tough aluminum sheet, Partial covers are highly polished and are available in 3�, 4� and 5� widths. All mounting hardware is included.
16332 3", all models
16334 4", all models
16336 5", SFT / DYNA & BIGDOG only
NOTE: Partial covers fit ONLY the outboard bearing support systems listed below.
16125 Softail/Dyna
16125BD BIGDOG DSSC
16126 Softail/Dyna
16126BD BIGDOG DSSC
16127 Softail/Dyna
16128 Softail/Dyna
16128BD BIGDOG DSSC
16128XCD Softail XCD
16225 FXR/Road King
16226 FXR/Road King
16227 FXR/Road King
16228 FXR/Road King
|
 |
| | 
Full Top Cover
For the ultimate in true function and head-turning style, nothing beats KARATA'S massive Full belt covers.
Full covers enclose the entire top of the belt for complete protection and aggressive good looks.
Fabricated from tough aluminum sheet, Full covers are highly polished and are available in 3�& 4�
\widths. All mounting hardware is included.
16322 3", Softail/Dyna
16323 4", Softail/Dyna
16326 3", FXR/Road King
16328 4", FXR/Road King
Full top covers can be used with the following
outboard bearing support kits:
16110 Softail/Dyna
16115 Softail/Dyna
16150 Softail/Dyna
16151 Softail/Dyna
16152 Softail/Dyna
16153 Softail/Dyna
16160 Softail/Dyna
16161 Softail/Dyna
16162 Softail/Dyna
16210 FXR/Road King
16215 FXR/Road King
16250 FXR/Road King
16251 FXR/Road King
16252 FXR/Road King
16253 FXR/Road King
16262 FXR/Road King
|
|
OUTBOARD BEARING SUPPORT SYSTEM ACCESSORIES
Bearing Carrier Pulley Covers
The main link in KARATA'S outboard bearing support systems are the massive bearings. Measuring
3-inches in diameter, these bearings can take the load, the torque and the abuse of the highest-
horsepower bikes. Housed in heavy CNC-sculpted billet aluminum carriers the big bearings provide
the rock-solid support for KARATA INTIMIDATOR SERIES primary belt drives. As with all KARATA
products, our outboard bearing support systems are completely rebuildable. All bearings, snap
rings and screws are available separately. |
| | 
| Low Profile Pulley Covers | | Softail/ Dyna front pulley cover | 16310 |
| Softail/ Dyna rear pulley cover | 16321 |
| | 
| Standard Pulley Covers | | Softail/ Dyna front pulley cover | 16311 | | FXR/ Road King front pulley cover | 16312 |
| All Models rear pulley cover | 16320 |
| |
| | 
| Low Profile Pulley Covers Back view |
| | 
| Standard Pulley Covers Back view | |
| |
OUTBOARD BEARING SUPPORT SYSTEM ACCESSORIES
Replacement parts
16340 Bearing, bearing support/pulley cover All models
16342 Retaining ring, bearing All models
16344 Retaining ring, carrier support All models
16348 Screws, top cover All models Stainless steel, 8pcs.
16350 Screws, outboard support plate All models Stainless steel, 6 pcs.
16352 Screws, bearing support/pulley covers All models Stainless steel, 10 pcs.
| | |
 |
Karata Enterprises Co
3 River Road
Conshohocken, PA 19428
Phone 610-825-2070
Fax 610-941-6142
[email protected]
|
 |
|
|
| |
|
|
